It is scientifically proven that the Copper-Oxide is the most powerful Anti-Bacterial natural mineral, which effectively eliminates numerous Bacteria, including the one that causes facial acne. Copper mask's cosmetic properties increase skin elasticity and reduce sagginess.

• Type IIR Bacterial Filtration Efficiency
  
• Copper Oxide Facemask 
• Medical Mask with Copper Oxide
• Catalog No.51S78908-009
• Ministry of Health of Israel approval No. 9950423
• 1 pack | 5 units
• Barcode: 6973227780601
• Color: Range of orange-brown-copper to salmon pink 
• Made in Israel

The mask itself is made out of three layers. The outer layer prevents droplets from entering and holds microscopic copper oxide polymers. The middle layer traps small particles that may pass through the outer layer. It also prevents the flow of particles outward. The inner layer is close to the nose and mouth and was designed to absorb moisture, also holds microscopic copper oxide polymers.

Layer A: Copper micro-particles based external non-woven non-binding fabric provides bacteria-free clean airflow

Layer B: The internal non-woven fabric keeps the bacteria trapped in the layer

Layer C: Copper micro-particles based external non-woven non-binding fabric provides bacteria-free clean airflow

Color
Natural Copper Oxide has an impact on the Mask color; hence, color variations can be expected in a different manufacturing lot.
The mask’s color can vary in the range of orange-brown-copper color to salmon pink color

Masks Quantity: 1 Pack - 5 units

Dimensions: 265*128 mm

Weight (Estimate) : 3.1g*5+4.5g=20g

You can wear the mask from both sides. The mask is Dual Side Use. The mask Inner/Outer-layer are completely the same and made of the patented copper material, hence it provides dual-side protection.

The mask does not need to be cleaned or washed, and retains its properties even when it is dirty.

Do not Wash |  Do not bleach |  Do not lron  | Dry Flat 

However, if you wish to clean, light stains (i.e. Makeup etc.) of the mask surface, please use a warm, damp cloth or sponge with light pressure on the masks’ surface, and let it dry, When cleaning, care must be taken not to physically damage the mask surface.

Do not use any makeup remover or detergent materials for cleaning the mask.

• Hold the ear loop of the mask with both hands

• Pull the strap of the mask back to the ear and fit comfortable

• Place the nasal wire on top

• Press the nasal wire firmly to cover the nose

•  The side on which the earlobe is not connected should face the face

•  The mask should cover the mouth and nose

•  On the side, the mask should adhere to the face, around the nose and under the chin

•  If you feel irritation during use, replace the mask or stop using it

•  Do not use the mask if it is torn or physically damaged in any way as the level of protection will be reduced

• Copper-Oxide Facemask is the Antiviral Medical Mask, Type IIR, with Copper Oxide particles confirmed by Israeli MoH as Anti-Viral Medical Masks
• High bacterial filtration efficiency and high splash protection - perfect for personal and medical staff use
• Two Sides protection, Dual-side Use. The patented material is implemented in the mask’s outer and inner layers.

Is the mask’s technology effective against the virus?

Absolutely. The patented material, used in the mask, was tested by internationally official laboratories; ‘COVID-19 Materials Science Research’ funded by the USA Department of Health and is proven to eliminate the virus SARS-CoV-2  in 1 minute¹. The Copper-Oxide mask was successfully tested for 6 weeks of anti-bacterial sustainability. The test result: Masks have been proven to sustain antimicrobial efficacy: " The study shows and supports well the antimicrobial properties of masks with Copper Oxide. The mask is as hostile to the microorganisms after 6 weeks. " Turku University, Finland

1.Borkow G, Lustiger D, Melamed E et al. Copper-oxide impregnated respiratory masks may significantly reduce the risk of SARS-CoV-2 cross-contamination. Research Square: https://www.researchsquare.com/article/rs-60610/v1 September 8th, 2020.

How long does the patented Copper-Oxide mask’s material retain its qualities?

The Copper-Oxide mask was successfully tested for 6 weeks of anti-bacterial sustainability. The copper oxide particles are a potent ability to repel viruses that do not decline over time.

Thanks to the potent Copper’s material features, you may wear a mask as needed depending on your daily activities. The copper's unique performance does not deteriorate due to Breath, Sweat, or Saliva.

Please note: disposable products are products that can be thrown away after it becomes unused (e.g., physical damaged). Physical damage affects mask efficiency.
In case of physical damage please dispose of the mask and replace it with a new one.

Please follow country regulations with regard to the use of medical devices, this mask included, especially in times of a global pandemic. 

How does it feel to wear it?

The Copper-Oxide Face Mask is simple and easy to use. The mask provides the comfort of use and easy to breathe, the feel exactly like other professional-grade IIR mask.

Does the mask performance reduce due to sweat, saliva, or humidity?

Not at all. Humidity, sweat, or saliva does not reduce the mask’s performance. Even better, it does not require any special maintenance work (e.g., sterilization, washing, etc.). The mask features do not deteriorate if the mask is wet.

Is the mask safe to wear?

Absolutely. The mask is a Non-Toxic, Non-Irritating, Breath Safe product. The mask is safe to wear and fully complies with EU standards and safety specifications such as EN ISO 14971:2012 | EN 62366-1:2015 | ISO 10993-1:2018 | ISO 10993-5:2009 |ISO 10993-10:2010

Research Square: COPPER-OXIDE IMPREGNATED RESPIRATORY MASKS MAY SIGNIFICANTLY REDUCE THE RISK OF SARS-COV-2 CROSS-CONTAMINATION

Copper-Oxide Antiviral Facemask: IS THIS THE BEST MASK AGAINST THE VIRUS?

Plos One: ANTI-INFLUENZA PROPERTIES OF A NOVEL COPPER OXIDE CONTAINING MASK

Find more articles

See all reviews