2 units Filtering Half Mask (1 pack | 1 unit)

PPE | TYPE FFP2 NR

CE 2163 -PPE-1722

EN 149:2001+A1:2009

Regulation (EU) 2016/425

Dual Copper Protection

Filtration Efficiency ≥95%

Patented Technology

Color: Range of orange-brown-copper to salmon pink 

Model No. HB-008

The mask consists of five (5) layers:

PP SpunBond Nonwoven Fabric Containing Copper-Oxide

Meltblown Nonwoven Fabric

PP SpunBond Nonwoven Fabric

Meltblown Nonwoven Fabric

PP spunbond Nonwoven Fabric Containing Copper-Oxide

 

Color
Natural Copper Oxide has an impact on the Mask color; hence, color variations can be expected in a different manufacturing lot.
The mask’s color can vary in the range of orange-brown-copper color to salmon pink color.

Masks Quantity: 2 Packs - 1 mask per pack

Dimensions: 175mm * 135mm

Weight (Estimate) : 10g

The mask Inner/Outer-layer are completely the same and made of the patented copper material, hence it provides dual-side protection.

The mask does not need to be cleaned or washed and retains its properties even when it is dirty.

Do not Wash |  Do not bleach |  Do not lron  | Dry Flat 

However, if you wish to clean, light stains (i.e. Makeup etc.) of the mask surface, please use a warm, damp cloth or sponge with light pressure on the masks’ surface, and let it dry, When cleaning, care must be taken not to physically damage the mask surface.

Do not use any makeup remover or detergent materials for cleaning the mask.

• Hold the ear loop of the mask with both hands

• Pull the strap of the mask back to the ear and fit comfortable

• Place the nasal wire on top

• Press the nasal wire firmly to cover the nose

•  The side on which the earlobe is not connected should face the face

•  The mask should cover the mouth and nose

•  On the side, the mask should adhere to the face, around the nose and under the chin

•  If you feel irritation during use, replace the mask or stop using it

•  Do not use the mask if it is torn or physically damaged in any way as the level of protection will be reduced

• Copper-Oxide Facemask is the Antiviral Medical Mask, Type IIR, with Copper Oxide particles confirmed by Israeli MoH as Anti-Viral Medical Masks
• High bacterial filtration efficiency and high splash protection - perfect for personal and medical staff use
• Two Sides protection, Dual-side Use. The patented material is implemented in the mask’s outer and inner layers.

Is the mask’s technology effective against the virus?
Absolutely. The patented material, used in the mask, was tested by internationally official laboratories; ‘COVID-19 Materials Science Research’ funded by the USA Department of Health and is proven to eliminate the virus SARS-CoV-2  in 1 minute¹. 
1.Borkow G, Lustiger D, Melamed E et al. Copper-oxide impregnated respiratory masks may significantly reduce the risk of SARS-CoV-2 cross-contamination. Research Square: https://www.researchsquare.com/article/rs-60610/v1 September 8th, 2020.

How long does the patented Copper-Oxide mask’s material retain its qualities?

Thanks to the potent Copper’s material features, you may wear a mask as needed depending on your daily activities. The copper's unique performance does not deteriorate due to Breath, Sweat, or Saliva.

Please note: disposable products are products that can be thrown away after it becomes unused (e.g., physical damaged). Physical damage affects mask efficiency.

In case of physical damage please dispose of the mask and replace it with a new one.

Please follow country regulations with regard to the use of medical devices, this mask included, especially in times of a global pandemic. 

How does it feel to wear it?

The Copper-Oxide Face Mask is simple and easy to use. The mask provides the comfort of use and easy to breathe, the feels exactly like another professional PPE mask.

Does the mask performance reduce due to sweat, saliva, or humidity?

Not at all. Humidity, sweat, or saliva does not reduce the mask’s performance. Even better, it does not require any special maintenance work (e.g., sterilization, washing, etc.). The mask features do not deteriorate if the mask is wet.

Is the mask safe to wear?

Absolutely. The mask is a Non-Toxic, Non-Irritating, Breath Safe product. The mask is safe to wear and fully complies with EU standards and safety specifications such as CE 2163 -PPE-1722 , EN 149:2001+A1:2009 | Regulation (EU) 2016/425